Diesel particulate filter
DPF delete by software
Software solution for competition, off-road use and countries where it is permitted. In Spain it is not legal to drive on public roads with the system deleted.
Find your distributorI'm a workshop: I want tuning files
Software solution
DPF delete
Benefits of deleting the DPF system:
- ⬢Better engine performance: removing the DPF reduces back pressure in the exhaust system, which lets the engine run more efficiently and improves its response.
- ⬢More power and torque: deleting the DPF can increase power and torque thanks to improved engine efficiency and lower exhaust back pressure.
- ⬢Lower fuel consumption: deleting the DPF can eliminate the need for regeneration, which can reduce fuel consumption.
- ⬢Fewer breakdowns and lower maintenance costs: removing the DPF can reduce the likelihood of DPF-related breakdowns and lower long-term maintenance costs.
DPF system delete process:
The DPF system delete process involves physically removing the particulate filter and reprogramming the ECU software to remove the DPF-related functions and prevent possible system errors.
Conclusion:
Deleting the DPF system can offer benefits in terms of performance, power and fuel savings, but it is essential to take the legal and warranty considerations into account before making this modification.
Vehicles for
competition
Competition vehicles in any diesel category are well suited to this type of DPF removal. If you build competition vehicles, contact us: we have a special product for you.
Legal notice
ReproRACE provides a global electronic modification service in many countries around the world. Users must check the legal regulations in their own country. ReproRACE does not offer emission control system deletes where they are not legal; in those places, use is limited to competition vehicles that are not driven on public roads.
ReproRACE offers you this service
You can have the DPF deactivated at your nearest distributor
Electronic DPF deactivation by software
Find your nearest distributor
What is the diesel particulate filter (DPF/FAP)?
The DPF (Diesel Particulate Filter), known in France as FAP (Filtre à Particules), is an exhaust system device designed to capture and store the soot particles produced when diesel fuel burns. It became mandatory with the Euro 5 standard (2009) to reduce particulate emissions from diesel engines.
The filter works through a process of regeneration: when the filter reaches a certain level of saturation, the ECU starts a regeneration cycle that raises the exhaust gas temperature above 600°C (1,110°F) to burn the accumulated particles and turn them into ash. This process can be passive (at sustained high speeds) or active (additional post-combustion fuel injection).
DPF system components
- Particulate filter (porous ceramic)
- Differential pressure sensors
- Temperature sensors (upstream and downstream of the filter)
- Diesel oxidation catalyst (DOC)
- Additive injection system (some models)
- EGR valve (exhaust gas recirculation)
Technical data
- Regeneration temperature: 550-650°C (1,020-1,200°F)
- Regeneration interval: 300-800 km (190-500 miles)
- Theoretical service life: 150,000-200,000 km (93,000-124,000 miles)
- Filtering efficiency: >95% of particles
- Maximum back pressure: ~200 mbar
Values vary by manufacturer and vehicle model.
Legal notice:
ReproRACE provides a global electronic modification service in many countries around the world. Users must check the legal regulations in their own country. ReproRACE does not offer emission control system deletes where they are not legal; in those places, use is limited to competition vehicles that are not driven on public roads.
Common DPF system problems
Failed regeneration
Short trips prevent the regeneration cycle from completing. The filter becomes saturated and goes into limp mode, limiting power and top speed.
Ash clogging
The ash left by combustion builds up over time. Unlike soot, ash does not burn off and progressively reduces the filter's capacity.
Faulty pressure sensors
Differential pressure sensors can give incorrect readings, causing unnecessary regenerations or preventing them from starting when needed.
Oil dilution
During incomplete active regenerations, the injected fuel can get into the crankcase, diluting the engine oil and reducing its lubricating ability.
High replacement cost
Replacing a DPF can cost between €1,500 and €4,000 depending on the vehicle. Some models also require specialized diagnostic tools.
Limp mode
When back pressure exceeds safe limits, the vehicle goes into limp mode, limiting power and RPM to protect the engine from serious damage.
When does a DPF delete make sense, and what are the alternatives?
A DPF delete by software only makes sense for vehicles that are not driven on public roads, such as competition or track cars, or in countries whose regulations allow it. On a street car, the right approach is to find out why the filter is clogging and fix it: regeneration, cleaning or replacement.
| Situation | What is usually behind it | What to do |
|---|
| Filter warning light after many short trips | Soot buildup because regenerations are interrupted | A long drive at steady rpm or a forced regeneration at the workshop |
| Regenerations every few miles | Differential pressure sensor or its hoses; injectors or EGR producing more soot | Diagnose the cause: code P2453, EGR valve, injectors |
| High-mileage filter that no longer regenerates | Ash buildup, which does not burn off during regeneration | Cleaning the removed filter or replacing it (code P242F) |
| Loss of power and warning light | Saturated filter or an incorrect sensor reading | Read the codes before replacing parts: P2002, P2463 |
| Competition or off-road vehicle | The filter is not mandatory for that use | Software delete with a calibration specific to the engine |
What is changed in the ECU
The calibration deactivates the functions that depend on the filter: the regeneration cycles, the monitoring of differential pressure and exhaust temperatures, and the associated diagnostics. It is prepared for each engine and each ECU, and before starting, the vehicle's original file is saved so you can always return to the stock software.
Clean the particulate filter or delete it?
On a vehicle driven on the road, clean it or replace it. A clogged particulate filter is almost always the result of another problem (city driving, a sensor, the EGR, the injectors), and if that is not fixed, a new or freshly cleaned filter will clog again.
Which fault codes does a problematic particulate filter set?
The most common are P2002, P2463, P242F, P2453, P2458, P2459. Each points to a different cause, so it is best to read them before clearing anything. If the car has also limited power, see why it goes into limp mode.
Is it legal to drive in Spain with the DPF deleted?
No. Disabling or modifying emission control systems (particulate filter, EGR, AdBlue/SCR and similar) is not permitted on vehicles driven on public roads in the European Union and in many other countries. ReproRACE only offers these solutions where regulations allow it, for example for competition, use on private property or markets whose legislation permits it. In Spain, the ITV inspection reads the emission control system of Euro 5 and Euro 6 vehicles through OBD, and a disabled or tampered emission control system is grounds for a failed inspection; in addition, a power increase is a modification that must be legalized. When there is a fault, the first step is always to diagnose and repair. More information in is it legal to tune a car in Spain?
All the faults and codes explained are in the index of faults and fault codes.
Our experience in numbers
+5.000
DPFs deleted
+200
Compatible models
0
Errors after removal
100%
Professional warranty
Service available for passenger cars, vans, trucks, buses and agricultural/industrial machinery
Frequently Asked Questions
What does DPF removal involve?
DPF removal has two parts: physically removing the filter from the exhaust system (replacing it with a straight pipe or downpipe) and reprogramming the ECU to deactivate all DPF-related functions, including regeneration cycles, sensor readings and fault codes.
Is it legal to remove the DPF?
It is NOT legal in most countries for vehicles driven on public roads. This service is intended exclusively for: approved competition vehicles, agricultural and industrial machinery that is not driven on the road, vehicles intended for export to countries where it is legal, and use on closed circuits (track days).
What are the benefits of removing the DPF in competition?
On competition vehicles where it is legal: a significant reduction in exhaust back pressure, better engine response, elimination of the regeneration cycles that affect performance, lower fuel consumption during sporty driving, and less risk of oil dilution.
Will any warning lights stay on after removal?
No. Our professional tune completely deactivates the DPF functions in the ECU, including the differential pressure, temperature and back pressure sensors. The vehicle will run normally with no warning lights and no fault codes stored in the diagnostic memory.
What types of vehicles can be treated?
We work with all types of diesel vehicles equipped with a DPF: passenger cars, vans, trucks, buses, tractors, combine harvesters and industrial machinery. We have specific solutions for all European and Asian makes: Volkswagen, Audi, BMW, Mercedes-Benz, Peugeot, Citroën, Renault, Ford, Volvo, Scania, DAF, MAN, Iveco, Toyota and Nissan, among others.
Related fault guides and codes
More guides: ash code P242F, regeneration code P2459, fault code guides.
Have questions? Contact us
Send
Related faults and codes
If your vehicle already has a symptom or a fault code, these guides explain the cause and what to check before touching the ECU.