Description
Mechanical characteristics:
- Roller diameter: 400 mm
- Roller width: 700 mm
- Balance quality grade G 2.5
- All mechanics are laser aligned.
- Overall dimensions mm: 4360 x 3470 x 460, exactly the same as the BPA-4R HP model.
- Maximum axle weight: 2,500 kg
- Direct mechanical linkage between front and rear axles, which can be fully deactivated by software.
- Oversized connection components to guarantee long life over time.
Performances:
- Maximum speed with activated link 250 km/h
- Maximum speed with deactivated link 360 km/h
- Maximum Absorbable Power 1,300 HP (Endurance Tests)
- Maximum measurable power 2,000 HP (Sweep power tests)
- Maximum tensile force 16,000 N
Power supplies:
- Voltage 3/N/PE 400 VAC
- Frequency 50 Hz
- Amperage 16 A
- Compressed air 6 bar
Advantages:
- Shorter repair time (fast and accurate diagnosis)
- Effective use of the instruments already present in the workshop (diagnostic equipment, gas analyzer).
- Avoid any risk arising from road tests (traffic, accidents, fines).
- Certification of results (performance improvement)
- Improved accessory sales through performance verification (exhaust systems, efi controller, etc.)
- Improving the sale of used vehicles through engine condition certification
- Review of the vehicle before the second-hand trade.
- Rental for tests and technical controls.
Measurement programs:
- Transmission check (clutch slippage)
- Power step test
- Power sweep test
- Cooling system overhaul (radiator, fan sensor, thermostatic valve)
- Diagnosis by gas analyzer under load.
- Constant speed vehicle test.
- Constant force vehicle test.
- Constant load vehicle test.
- Road simulation (slope, drag resistance, weight)
- Constant RPM vehicle test
- Durability testing
- Engine mapping at all RPMs
- Diagnostics by scantool during road simulation.
Constructive characteristics:
- 2 eddy current brakes; 8 rollers paired with HTD belts, knurled over the entire width and finished by cut knurling
- 2 bevel gearboxes
- 1 cardan shaft with extension for adaptation to the vehicle’s wheelbase
- Infrared remote control test bench management directly from the vehicle cab
- Lambda input for connection of the vehicle’s lambda sensor or an external controller
- Input boost pressure 0÷2.5 bar relative pressure ± 0.035 bar error
- Fully functional management software; Pneumatic vehicle lift, with integrated roller locking system
- Electrical adjustment of the vehicle’s wheelbase.
Optional features:
- Double mobile ventilation system on wheels, nominal power 6 kW, flow 44,000 m3/h
- Wheeled mobile individual ventilation system, rated power 3 kW, flow 22,000 m3/h
- Lambda Kit: 5-wire broadband lambda sensor and controller
- Wide aluminum loading ramps. Necessary when the test stand is installed on the floor.
- Computer cart constructed of durable, heavy-duty steel. Pro: large, mobile and sturdy work surface.
- Proportional control of the ventilation speed by adjusting the fan speed according to the speed of the rollers.
- Roller covers protect the rollers when the dynamometer is not running.
- Personal computer and display
- Safety equipment: Safety side barriers with logo panels, Ratchet anchor straps, High-attenuation earmuffs
- OBDII parameter reading and DTC clearing without the need for additional hardware and dedicated interfaces.
Comparison between our dynamometers:
| BPA-2R HP | BPA-4R HP | BPT-2R | BPA-2R S | BPA-4R S | |||
| Performance | |||||||
| Maximum speed | 360 km/h | 360 km/h | 200 km/h | 250 km/h | 250 km/h | ||
| Maximum absorbable power | 650 HP | 1300 HP | 400 HP | – | – | ||
| Maximum measurable power | 1000 HP | 2000 HP | 900 HP | 400 HP | 800 HP | ||
| Maximum tensile strength | 8000 N | 16000 N | 16000 N | – | – | ||
| Mechanical characteristics: | |||||||
| Roller diameter | 400 mm | 400 mm | 400 mm | 240 mm | 240 mm | ||
| Roller width | 700 mm | 700 mm | 700 mm | 660 mm | 660 mm | ||
| Roller balancing | G 2.5 | G 2.5 | G 2.5 | G 2.5 | G 2.5 | ||
| Equivalent in inertia base | 450 Kg | 900 Kg | 550 Kg | 240 Kg | 480 Kg | ||
| Dimensions | 3470×1135 mm | 4360×3470 mm | 3470×5300 mm | 3070×870×310 mm | 4160×3130 mm | ||
| Platform height | 410 mm | 460 mm | 640 mm | 360 mm | 360 mm | ||
| Weight | 2500 kg | 2500 kg | – | 2000 kg | 2000 kg | ||
| Voltage | 400 V 50 Hz 3/N/PE | 400 V 50 Hz 3/N/PE | 400 V 50 Hz 3/N/PE | 220 V 50 Hz 1/N/PE | 220 V 50 Hz 1/N/PE | ||
