Stage 1
Stage 1 ECU tuning: more power and torque without changing parts
A software calibration of the ECU for a stock vehicle: more power and torque and better response, without touching the mechanics.
Find your distributorI'm a workshop: I want tuning files
Maximum power
We adapt to your setup
Dyno-tested
Every calibration is verified on the dyno
Lower fuel consumption
Depending on your vehicle and the way you drive
What is Stage 1 ECU tuning?
With every guarantee
The Stage 1 ECU tuning is the optimization of the ECU software of a stock vehicle, without changing any parts. Depending on the engine, it delivers up to 30% more power and torque, sharper throttle response and, on many diesels, lower fuel consumption. It is reversible, because we keep the original file, and for passenger cars it usually costs between €300 and €500 depending on the vehicle. Power is increased by increasing the mass of the mixture in the combustion chamber. To do this we optimize air, injection, pressure, timing and injection point parameters, across all the conditions the vehicle may face in terms of altitude and temperature.
Our constant development of features and continuous dyno testing give us the capability needed to modify your vehicle's electronics with the highest guarantees.
All ReproRACE electronics are produced at our headquarters for all distributors in every country, which guarantees a tested result on your vehicle.
What does Stage 1 ECU tuning include?
- Prior diagnosis of the vehicle and ECU read via OBD, bench or boot, depending on the ECU.
- Our own calibration for your engine, developed and tested on the dyno.
- A copy of the original software is kept, so you can return to stock whenever you want.
- 2-year warranty on the software and technical support after the service.
Approximate gains by engine type
- Turbo diesel: between 20% and 35% more power and torque.
- Turbo gasoline: between 15% and 30%.
- Naturally aspirated gasoline: between 5% and 12%.
These figures are approximate. The exact gain for your car, with its power curve and price, is on its page: find your vehicle and check it.
How much does a Stage 1 cost?
Each vehicle has its own price. For passenger cars, a Stage 1 usually costs between €300 and €500. The exact amount is shown on your model's page and confirmed by your nearest ReproRACE workshop.
Stage 1 FAQ
Do any parts need to be changed?
No. Stage 1 is done on the stock vehicle. If you already have a modified downpipe, intake or exhaust, the right choice is a Stage 2.
Can it be returned to the original software?
Yes. We keep the original file from your ECU and it can be restored at any time.
Does the car's maintenance change?
No. Maintenance intervals are those set by the manufacturer. It is best to come in for the tune with maintenance up to date.
How long does it take?
It depends on how the ECU is read. Usually the vehicle stays at the workshop for a few hours.
Related fault guides and codes
More guides: code P0087, overboost code P0234, fault code guides.
Before you decide: is it legal to tune a car in Spain?, does it void the warranty?, how much does it cost?.
Related codes: mass airflow sensor code P0101.

What will I get with Stage 1?
Maintenance
Maintenance intervals will be the same as those recommended by the manufacturer. See those for Stage 2 and Stage 3
Speed
Your vehicle will be faster. It will accelerate harder. It will be able to cruise in a higher gear and save fuel.
Faults
Your vehicle will not suffer more wear. You will have more power without putting durability at risk.
Better acceleration
Stronger launch. Up to 30% extra power in your vehicle, noticeable from the very first moment.
Turbo & naturally aspirated
Tunes adapted to both turbocharged and naturally aspirated vehicles.
Lower fuel consumption
With our electronic optimization you will get lower fuel consumption per mile driven
Depending on the purpose
We can offer you
Maximum power (formerly MaxiRACE)
Minimum fuel consumption (formerly EcoRACE)
Contact us
Send message
Related faults and codes
If your vehicle already has a symptom or a fault code, these guides explain the cause and what to check before touching the ECU.