Stage 2
Stage 2 ECU tuning for modified vehicles
For vehicles with intake, exhaust or intercooler modifications: the calibration takes advantage of those parts and keeps the engine's safety margins.
Find your distributorI'm a workshop: I want tuning files
Maximum power
We adapt to your setup
Dyno-tested
Every calibration is verified on the dyno
Lower fuel consumption
Depending on your vehicle and the way you drive
Stage 2

With every guarantee
The Stage 2 ECU tuning is the calibration for vehicles that already have mechanical modifications, such as a downpipe, intake, intercooler or exhaust system. We adjust the ECU to those parts to take advantage of the higher air and exhaust flow, with gains above those of a Stage 1. The parts must be installed and we review each case before tuning. Power is increased by increasing the mass of the mixture in the combustion chamber. To do this we optimize air, injection, pressure, timing and injection point parameters, across all the conditions the vehicle may face in terms of altitude and temperature.
Our constant development of features and continuous dyno testing give us the capability needed to modify your vehicle's electronics with the highest guarantees.
All ReproRACE electronics are produced at our headquarters for all distributors in every country, which guarantees a tested result on your vehicle.
What does a car need for Stage 2?
Stage 2 starts from a vehicle that already has mechanical upgrades. The most common are:
- Downpipe or larger-bore exhaust system.
- High-flow intake.
- Larger intercooler on turbo engines.
Before tuning we check which parts the car has and their condition, because the calibration is tailored to that specific setup.
Difference between Stage 1 and Stage 2
The Stage 1 optimizes the software of a stock car. Stage 2 takes advantage of the higher air and exhaust flow the new parts allow, which is why it delivers more power and torque than a Stage 1 on the same engine. If the project includes a turbo, injectors or high-pressure pump, we are already talking about a Stage 3.
Stage 2 FAQ
How much does a Stage 2 cost?
The price depends on the vehicle and is shown on its page next to the Stage 1 price. Find your vehicle to see it.
Can I move from Stage 1 to Stage 2 later?
Yes. When you install the parts, the ECU is recalibrated to adapt it to the new setup.
Where can I get it done?
In a workshop in the ReproRACE network. They will tell you which parts your engine needs and validate the result.
Some mechanical modifications may be restricted for use on public roads depending on the country. Check the applicable regulations before modifying your vehicle.
Select your distributor
What will I get with Stage 2?
discover our
Tunes
Maximum power (formerly MaxiRACE)
Minimum fuel consumption (formerly EcoRACE)
Contact us
Send message
Related faults and codes
If your vehicle already has a symptom or a fault code, these guides explain the cause and what to check before touching the ECU.